What Style Wheel Do I Have?

Jul 23, 2018Posted by in Electric Fender Blender Pro, FAQ, Fender Blender Pro, Fender Blender Pro FAQ, Generator Pro, Ice Cream Bike, Ice Cream Bike FAQ, Ice Cream Bike Pro Pedal Powered Ice Cream Maker, Icycleta, Icycleta Ice Cream Bike Attachment for Fender Blender Pros, One Bike One Speaker, Recharge Station, Recharge Station FAQ, sLEDgehammer, Spin Art for Fender Blenders, Spin Art for Fender Blenders FAQ | Comments Off on What Style Wheel Do I Have?

What Style Wheel Do I Have?

When ordering new wheel covers OR an Icycleta Ice Cream Bike Attachment it’s important for us to know what style wheel you have. Not sure how to tell? Let us help you find out.

“What wheel cover style is compatible with my wheel?”

Ordering new wheel covers?  We need to know which wheel you have so we make sure to send you the compatible wheel cover.  Take a look at your wheel hub and see which image below matches your wheel.

“Do I need a new wheel for my Icycleta attachment?”

Ordering the Icycleta Ice Cream Bike Attachment? If you have the new wheel style you can attach the Icycleta pulley on the same wheel without requiring anything additional. If you have the older wheel style we will send a whole new wheel to attach the Icycleta to the Pro.

Please let us know in the COMMENTS section when placing your order.

New style wheel :

 

 

 

Old Style wheel :

 

 

 

Read More

Rentable Pedal Powered Activities

Oct 19, 2016Posted by in Electric Fender Blender Pro, Fender Blender Pro, Fender Blender Pro FAQ, Fender Blender Pro Related, Generator Pro, Ice Cream Bike, Ice Cream Bike FAQ, Ice Cream Bike Pro Pedal Powered Ice Cream Maker, Pedal Power Rentals, Pedal Powered Stage Gear, Pedal Powered Stage Gear FAQ, Services, Spin Art for Fender Blenders FAQ | Comments Off on Rentable Pedal Powered Activities

Rentable Pedal Powered Activities

You can green your event by renting our Pedal Power gear, reducing your carbon footprint and inspiring people at your event. Pedal Power gives your event attendees a unique experience that they will never forget. Check out all our great Pedal Powered activities for rent, and let’s start talking about your upcoming event.

Read More

Egg-Free, Cardamom Oatmeal Cookie Ice Cream

Jul 29, 2016Posted by in Ice Cream Bike, Icycleta | Comments Off on Egg-Free, Cardamom Oatmeal Cookie Ice Cream

Egg-Free, Cardamom Oatmeal Cookie Ice Cream

Kate Zuckerman, celebrated pastry chef and cousin to the Rock the Bike founder, has shared one of her ground breaking ice cream flavors with us, an egg-free, dairy recipe that uses natural thickeners to achieve the same results as egg based custards! Read her thoughts on developing egg-free custards for the home chef here!

Oakland+shoot+3.22

Now put your hands (and legs!) to action and make this delicious recipe!

Cardamom Oatmeal Cookie Ice Cream

Ingredients:

5 cups heavy cream
7 ½ cups milk
1 ¾ cups cane sugar + 1 tablespoon
1 tsp. sea salt
1 tsp. vanilla extract
2 tablespoons cardamom pods
3 tablespoons rice flour mixed*
.75 g. xanthan gum (just less than ¼ tsp.)*
2.5 g. locust bean gum (3/4 tsp.)*
2 ½ cups oatmeal cookie crumbs

*Replaces egg

 

Method:

  1. Heat cream and milk up in a large pot. Add the sugar (except the extra tablespoon),
    salt, vanilla. With a mortar and pestle, grind up the cardamom pods and add them to the
    milk/cream mixture. Let this mixture come to a simmer.
  2. Meanwhile, weigh out the xanthan gum and locust bean gum and mix the gums into
    the extra 1 tablespoon of sugar in a small bowl. Set it aside. Measure out the rice flour
    and add it to the small bowl with the xanthan gum and locust bean gum.
  3. Once the milk/cream mixture is close to simmering, with a whisk, add the rice
    flour/sugar/gum mixture. Whisk vigorously. Allow the mixture to simmer for a minute
    and then remove it from the stove.
  4. Strain out the cardamom. Mix the oatmeal cookie crumbs into the hot ice cream base.
    Chill the base over ice. Churn in the Immergood Ice Cream churn with the bike once the
    base is well chilled.
Read More

Malted Banana Chip Vegan Ice Cream Recipe from Sweetcycle

Jul 29, 2016Posted by in Ice Cream Bike, Icycleta Ice Cream Bike Attachment for Fender Blender Pros, Uncategorized | Comments Off on Malted Banana Chip Vegan Ice Cream Recipe from Sweetcycle

Malted Banana Chip Vegan Ice Cream Recipe from Sweetcycle

Kate Zuckerman — pastry chef, savory chef, cooking instructor, recipe tester, cookbook author, avid commuter/cargo cyclist and mother of three kids – acquired the ice cream/blender bike from her cousin Paul, inventor, musician, bike enthusiast and founder of Rock the Bike, and has been churning out sweet treats in Brooklyn with SweetCycle ever since!

Check out her recipe for Malted Banana Chip Vegan Ice Cream:

Ingredients:
3 cups cashew milk
2 cans coconut milk (13.6 fl. ounce cans)
1 ¼ cups maple syrup
1 teaspoon vanilla extract
1 teaspoon salt
1/3 cup barley malt syrup
6 large ripe bananas
½ teaspoon cinnamon

Method:

1. For the cashew milk, soak 1 ¼ cups raw cashews in 3 cups of water for at least 4 hours or overnight. Discard the soaking liquid and rinse the cashews. Blend 2 cups of water with the soaked cashews. Blend until the mixture is totally smooth.

2. Add the coconut milk, barley malt, salt, vanilla extract, bananas and ½ t. cinnamon.

3. Pedal blend all the ingredients until the mixture is smooth.

4. Pedal churn with the Icycleta until thick and creamy.

MaltedBananaIceCream

Read More

What kind of vehicle should I use to transport the Pro frame?

Jun 10, 2016Posted by in Electric Fender Blender Pro, FAQ, Fender Blender Pro, Generator Pro, Ice Cream Bike, Ice Cream Bike Pro Pedal Powered Ice Cream Maker, Icycleta Ice Cream Bike Attachment for Fender Blender Pros, One Bike One Speaker, Recharge Station, sLEDgehammer, Spin Art for Fender Blenders | Comments Off on What kind of vehicle should I use to transport the Pro frame?

What kind of vehicle should I use to transport the Pro frame?

Most hatchback style cars can usually fit at least one partially disassembled Pro frame inside. You’ll want to use a car with a large trunk; it’s even better if the back seats fold down to extend the trunk space.

A pickup truck can carry 2-4 fully built Pro frames in the bed. Most SUVs can carry a single Pro frame in the trunk with no disassembly. Smaller cars may probably require some small adjustments or disassembly such as lowering the handlebars, dropping the saddle, or removing the crossbar to fit in the trunk or back seat.

Most vehicles can fit 2 bike blenders with small adjustments or disassembly. We will provide the hex wrenches you’ll need to reassemble the bike again at your destination.

Any car will work if you’re using a regular bike rack.

https://c2.staticflickr.com/2/1468/26161342560_4ca148ac8b_z.jpg

Above: Tone transports a Fender Blender Pro on a sedan with a regular bike rack. Note the towel wrapped around the end of the crossbar to keep it from scratching the bumper.

A roof rack can help if you want to use a small car and don’t want to do any disassembly. Here’s a photo to show roof rack use and size comparison.

We encourage you to try bike towing with your rental bike. It’s fun, safe, practical and reduces the carbon footprint of your event, and there is no disassembly required! Any bicycle with a rear rack can tow the Fender Blender Pro. There is no extra rental charge for the trailer wheels and hitch, or you can purchase the Tow Kit to travel with your bike blender.

Read More

How to Design and Submit your Custom Branding Artwork

Oct 10, 2013Posted by in Fender Blender Pro, Ice Cream Bike, Spin Art for Fender Blenders | Comments Off on How to Design and Submit your Custom Branding Artwork

How to Design and Submit your Custom Branding Artwork

Designing your artwork gives you complete creative control. Below we show your graphic designer how to submit your custom artwork for Wheel brandingPro Frame branding, Spin Art drum branding, and Recharge Desk branding. If you need the template to complete your art please email us at customerservice@rockthebike.com.

All wheel and drum branding artwork must be received print ready – 300dpi in PDF or TIFF file format – at least 3 weeks from your shipping deadline (as listed on your estimate/invoice). If artwork is not print-ready there could be a delay in production which could impact shipping and receiving deadlines.

All frame and Recharge Desk branding artwork must be received as a vector file – .ai or .eps  file format – at least 3 weeks from your shipping deadline (as listed on your estimate invoice)If artwork is too small to print there could be a delay in production which could impact shipping and receiving deadlines. 

Submit to customerservice@rockthebike.com. Once received a rendering of your custom art will be returned to you for final review and approval. Upon approval printing and installation will take roughly 3 weeks to turnaround.

Avoid delays by reading more information below.

Read More