Is Your Fender Blender Pro Seat Sliding Too Much?

Feb 13, 2020Posted by in Blog, Electric Fender Blender Pro, Electric Fender Blender Pro Related Posts, Fender Blender Pro FAQ, Fender Blender Pro Related | Comments Off on Is Your Fender Blender Pro Seat Sliding Too Much?

Is Your Fender Blender Pro Seat Sliding Too Much?

This bulletin addresses issues with seat post sliding performance. A correctly functioning seat post should be easy to slide up and down with one hand. If there are positions where it gets stuck, please see the three sections below.

1. Check which bolt you have: Check if the anti-rotate bolt behind the seat post is a domed button-head type. We’ve found that this design of bolt can cause issues with sliding performance. Even if your seatpost is sliding fine, we’d like to send you the replacement.

Get a replacement: Contact us and we will send you a replacement that doesn’t scratch the seatpost slot. Contact info below.

2. Deal with existing scratches: Check for scratching and burrs around the groove on the back of the seat post. You may notice that the seat post gets stuck as it slides into the frame in specific areas where the seat post is heavily marked or scratched.


Fix: Requires a sanding tool such as emery board, file, or sandpaper. If you would like us to send you one, please contact us, info below.

  • Remove the seat post from the bike. The hex key that comes with the bike will be needed to remove the anti rotate bolt.
  • Sand around and in the groove to remove sharp edges and burrs. Avoid breathing the dust. For the best sliding performance, you must take the rough spots all the way down. If your seatpost is really chewed up and you would prefer a fresh start, contact us for a new post! 
  • Immediately clean up any dust with a wet paper towel and wash your hands after completing the process.
  • Repeat sanding as necessary.

3. Chatter: Seat Post chatters when sliding down and needs precise manual guidance in order to slide; especially when the seat is extended to a higher number, like 9 or 10.

Fix: Lubricate the seat post with a silicone-based grease. If you would like us to send you some, please contact us, info below. How to apply the grease

  • Raise the seat post all the way up and clamp in place
  • Apply the lubricant onto the post near the top, middle, and bottom to form 3 rings, about the size of a rubber bands
  • Spread the lubricant over the whole seat post with a small piece of paper towel, napkin or rag (approx the size of a credit card)
  • Slide the seat all the way up and down five times
  • Using a fresh paper towel, wipe off the excess lubricant

If these or other performance issues are happening to your Fender Blender Pro, please contact us for support: 1-(888) 354-2453 techsupport@rockthebike.com

Read More

How to Assemble Your Fender Blender Pro

Jan 24, 2020Posted by in Fender Blender Bike Blenders from Rock the Bike, Fender Blender Pro, Fender Blender Pro FAQ, Fender Blender Pro Features, Pedal Power Rentals, Rentable | Comments Off on How to Assemble Your Fender Blender Pro

Learn how to assemble your Fender Blender Pro with crewmember Maisha from the Rock The Bike events team.

For best results have your owner’s manual in addition to this video.

Packaging: 0:13

Crossbeam: 0:53

Rear Legs: 1:45

Pedals: 2:48

Wheel & Chain: 3:27

Seat Post: 5:11

Stem & Handlebars: 5:58

Blender Base: 7:03

Transportation: 7:50

Blending: 8:03

Anyone can do it! Get ready to blend by following our best tips.

Still having trouble? Contact us for more help. 888-354-2453

Read More

What Style Wheel Do I Have?

Jul 23, 2018Posted by in Electric Fender Blender Pro, FAQ, Fender Blender Pro, Fender Blender Pro FAQ, Generator Pro, Ice Cream Bike, Ice Cream Bike FAQ, Ice Cream Bike Pro Pedal Powered Ice Cream Maker, Icycleta, Icycleta Ice Cream Bike Attachment for Fender Blender Pros, One Bike One Speaker, Recharge Station, Recharge Station FAQ, sLEDgehammer, Spin Art for Fender Blenders, Spin Art for Fender Blenders FAQ | Comments Off on What Style Wheel Do I Have?

What Style Wheel Do I Have?

When ordering new wheel covers OR an Icycleta Ice Cream Bike Attachment it’s important for us to know what style wheel you have. Not sure how to tell? Let us help you find out.

“What wheel cover style is compatible with my wheel?”

Ordering new wheel covers?  We need to know which wheel you have so we make sure to send you the compatible wheel cover.  Take a look at your wheel hub and see which image below matches your wheel.

“Do I need a new wheel for my Icycleta attachment?”

Ordering the Icycleta Ice Cream Bike Attachment? If you have the new wheel style you can attach the Icycleta pulley on the same wheel without requiring anything additional. If you have the older wheel style we will send a whole new wheel to attach the Icycleta to the Pro.

Please let us know in the COMMENTS section when placing your order.

New style wheel :

 

 

 

Old Style wheel :

 

 

 

Read More

Rentable Pedal Powered Activities

Oct 19, 2016Posted by in Electric Fender Blender Pro, Fender Blender Pro, Fender Blender Pro FAQ, Fender Blender Pro Related, Generator Pro, Ice Cream Bike, Ice Cream Bike FAQ, Ice Cream Bike Pro Pedal Powered Ice Cream Maker, Pedal Power Rentals, Pedal Powered Stage Gear, Pedal Powered Stage Gear FAQ, Services, Spin Art for Fender Blenders FAQ | Comments Off on Rentable Pedal Powered Activities

Rentable Pedal Powered Activities

You can green your event by renting our Pedal Power gear, reducing your carbon footprint and inspiring people at your event. Pedal Power gives your event attendees a unique experience that they will never forget. Check out all our great Pedal Powered activities for rent, and let’s start talking about your upcoming event.

Read More